Planet ADN-4101 User Manual page 9

Front Panel
The following table describes the LEDs of the device.
LED Color
Green
PWR
Red
Link Green
Green
Data
Red
Green
LAN1~4
WLAN Green
WPS Green
Status
Off The power is off.
On The device is powered on and the initialization is normal.
The device is self-testing or self-testing is failed, or the
On
software upgrade is under progress.
Slow Blinks No signal is detected.
The device is handshaking with the physical layer of the
Fast Blinks
office.
On The device is connected to the physical layer of the office.
Off The device is in the bridge mode.
Blinks Internet data is being transmitted in the routing mode.
The Internet connection is normal in the routing mode (for
On example, PPP dial-up is successful), and no Internet data
is being transmitted.
The
On synchronization in the routing mode (for example, PPP
dial-up failed).
Off The Ethernet interface is disconnected.
Data is being transmitted through the LAN interface, or
Blinks
the Internet data is being transmitted in the bridge mode.
On The LAN connection is established and activated.
Off The LAN connection is not activated.
Blinks Data is being transmitted through the WLAN interface.
On The WLAN connection is activated.
Off The WLAN connection is not activated.
WPS is activated and the device is waiting for negotiation
Blinks
with the clients.
4
802.11n Wireless ADSL2/2+ Router
Description
Internet connection
ADN-4101
fails after successful