Planet ADN-4101 User Manual page 31

Field
Default Gateway
Max Lease Time
Domain Name
DNS Servers
Set Vendor Class IP Range
Click Show Client on the DHCP Mode page and the page shown in the following figure appears. You can view the IP
address assigned to each DHCP client.
The following table describes the parameters and buttons on this page:
Field
IP Address
MAC Address
Expiry (s)
Refresh
Close
assigned to clients.
Enter the default gateway of the IP address pool.
The lease time determines the period that the host retains the assigned IP
addresses before the IP addresses change.
Enter the domain name if you know. If you leave this blank, the domain name
obtained by DHCP from the ISP is used. You must enter host name (system
name) on each individual PC. The domain name can be assigned from the
router through the DHCP server.
You can configure the DNS server IP addresses for DNS Relay.
Click it, the Device IP Range Table page appears. You can configure the IP
address range based on the device type.
Description
It displays the IP address assigned to the DHCP client from the router.
It displays the MAC address of the DHCP client.
Each Ethernet device has a unique MAC address. The MAC address is
assigned at the factory and it consists of six pairs of hexadecimal character, for
example, 00-A0-C5-00-02-12.
It displays the lease time. The lease time determines the period that the host
retains the assigned IP addresses before the IP addresses change.
Click it to refresh this page.
Click it to close this page.
26
802.11n Wireless ADSL2/2+ Router
Description
ADN-4101