Table of Contents
Advertisement
Field
After setting, click Next and the page as shown in the following figure appears.
Click BACK to modify the settings.
Click FINISH to save the settings.
Click RESET to cancel the settings.
If the WAN connection type is set to PPPoA, the parameters of the WAN connection
type are the same as that of PPPoE. For the parameters on these pages, refer to the
parameter description of PPPoE.
1483 MER/1483 Routed
On the Connection Type page, set the WAN connection type to 1483 MER, and the encapsulation mode to
LLC/SNAP.
addresses before the IP addresses change.
17
802.11n Wireless ADSL2/2+ Router
Description
ADN-4101
Advertisement
Table of Contents
