Planet ADN-4101 User Manual page 43

The following table describes the parameters on this page:
Field
Authentication
Data Rate
PreambleType
Broadcast SSID
Relay Blocking
Ethernet to Wireless Blocking
Wifi Multicast to Unicast
Aggregation
Short GI
Apply Changes
3.4.3.6 WPS
Choose WLAN > WPS and the following page appears.
Select the modem operating in the open system or encryption authentication.
You can choose Open System, Shared Key, or Auto.
In the open system, the wireless client can directly connect to the device
In the encryption authentication, the wireless client connects to the
modem through the shared key.
Choose the transmission rate of the wireless data.
You can choose Auto, 1 M, 2 M, 5.5 M, 11 M, 6 M, 9 M, 12 M, 18 M, 24 M, 36
M, 48 M, 54M, MSC0 ~ MSC7.
Long Preamble: It means this card always use long preamble.
Short Preamble: It means this card can support short preamble
capability.
Select whether the modem broadcasts SSID or not. You can select Enable
or Disable.
Select Enable, the wireless client searches the modem through
broadcasting SSID.
Select Disable to hide SSID, the wireless clients can not find the SSID.
Wireless isolation. Select Enable, the wireless clients that are connected to
the modem can not intercommunication.
Whether the wireless network can communicate with the Ethernet network or
not.
Enable it to using unicast to transmit multicast packet
It is applied when the destination end of all MPDU are for one STA.
It is not recommended to enable GI in obvious environment of Multi-path
effect.
Click it to apply the settings temporarily. If you want to save the settings of
this page permanently, click Save in the lower left corner.
38
802.11n Wireless ADSL2/2+ Router
Description
ADN-4101