Table of Contents
Advertisement
The following table describes the parameters and buttons on this page:
Field
Protocol
ATM VCC
Login Name
Password
Authentication Method
Connection Type
Idle Time (s)
Bridge
AC-Name
Service-Name
802.1q
Apply Changes
Return
Reset
Source Mac address
MAC Clone
It displays the protocol type used for this WAN connection.
The ATM virtual circuit connection assigned for this PPP interface
(VPI/VCI).
The user name provided by your ISP.
The password provided by your ISP.
You can choose AUTO, CHAP, or PAP.
You can choose Continuous, Connect on Demand, or Manual.
If choose Connect on Demand, you need to enter the idle timeout
time. Within the preset minutes, if the router does not detect the flow of
the user continuously, the router automatically disconnects the PPPoE
connection.
You can select Bridged Ethernet, Bridged PPPoE, or Disable Bridge.
The accessed equipment type.
The service name.
You can select Disable or Enable. After enable it, you need to enter the
VLAN ID. The value ranges from 1 to 4095.
Click it to save the settings of this page temporarily.
Click it to return to the Channel Configuration page.
Click it to refresh this page.
The MAC address you want to clone.
Click it to enable the MAC Clone function with the MAC address that is
configured.
31
802.11n Wireless ADSL2/2+ Router
Description
ADN-4101
Advertisement
Table of Contents
