Other Printing Problems - Ricoh 9050b Operating Instructions Manual

Other Printing Problems

This section describes likely causes of and possible solutions for problems that can occur when printing
from a computer.
Problem
The printed image is
smudged.
The printed image is faded
over the entire page.
The printed image is faded
over the entire page.
The printed image is faded
over the entire page.
The printed image is faded
over the entire page.
Images smudge when
rubbed. (Toner is not fixed.)
When you cannot print clearly
Cause
Settings for thick paper have
not been made when printing
on thick paper in the bypass
tray.
When is blinking, toner is
beginning to run out.
The paper is damp.
The paper is unsuitable.
If the [Toner saving] is
selected in the printer driver
settings, the entire page will
be faded when printed.
The specified paper type and
the paper that is actually
loaded might be different. For
example, thick paper might
Other Printing Problems
Solution
PCL 5e/6
On the [Paper] tab, select [Bypass
Tray] in the [Input Tray:] list, and
then select "Thick 1-2" in the
[Type:] list.
RPCS
On the [Setup] tab, select [Bypass
Tray] in the [Paper source tray:] list,
and then select "Thick 1-2" in the
[Paper type:] list.
Add toner. See p.106 "Adding
Toner".
Use paper that has been stored in the
recommended temperature and
humidity condition. See "Paper
Storage", About This Machine.
Use recommended paper. Printing on
coarse or treated paper might result in
faint print image. See "Recommended
Paper Sizes and Types", About This
Machine.
On the RPCS printer driver's [Print
Quality] tab, in the [Document type]
area, select the document type other
than [Toner saving].
PCL 5e/6
On the [Paper] tab, select a proper
paper type in the [Type:] list.
4
73