Messages Printed On The Error Logs Or Reports - Ricoh 9050b Operating Instructions Manual

Message
"You do not have the
privileges to use this function."

Messages Printed on the Error Logs or Reports

This section describes likely causes of and possible solutions for the error messages that are printed on the
error logs or reports.
Message
"84: Error"
"85: Error"
"86: Error"
"91: Error"
"92: Error"
"Address Book is currently in
use by another function.
Authentication has failed."
"Auto-registration of user
information has failed."
Cause
The logged in user name does
not have permission for the
selected function.
Cause
There is no work area
available for image
processing.
The specified graphics library
is unavailable.
Parameters of the control
code are invalid.
Printing was canceled by the
auto job cancel function due
to a command error.
Printing was canceled
because [Job Reset] or the
[Clear/Stop] key was
selected on the machine's
control panel.
The machine currently cannot
perform authentication
because the address book is
being used by another
function.
Automatic registration of
information for LDAP
Authentication or Windows
Messages Displayed When Using the Printer Function
Solution
Contact the administrator about the
permission for the required function.
Solution
• In [Printer Features], under
[System], set [Memory Usage] to
[Font Priority].
• Decrease the number of files sent to
the machine.
Check that the data is valid.
Set the parameters correctly.
Check that the data is valid.
Perform the print operation again if
necessary.
Wait a while, and then retry the
operation.
Contact the administrator.
4
61