Loading Paper Into Tray 3 (Lct) - Ricoh 9050b Operating Instructions Manual

6. Adding Paper, Toner and Staples
2. Square the paper and load it print side up.
3. Carefully push the paper tray fully in.

Loading Paper into Tray 3 (LCT)

This section describes how to load paper into tray 3 (LCT).
6
• Tray 3 (LCT) uses 8
A4 , contact your service representative.
• Align the paper stacks and load them against the left and right walls, or a paper misfeed might occur.
• Each tray hold up to 1,000 sheets of paper. Do not stack paper over the limit mark.
1. Carefully pull out tray 3 (LCT) until it stops.
98
BBR003S
1
/ × 11 paper exclusively. Only load 8
2
BBR023S
1
/ × 11 paper. If you want to load
2