Remarks; Where To Put Your Machine; Machine Environment - Ricoh 9050b Operating Instructions Manual

8. Remarks

This chapter describes how to maintain and operate the machine.

Where to Put Your Machine

This section describes precautions for installation and movement.

Machine Environment

Choose your machine's location carefully.
Environmental conditions greatly affect its performance.
Moving
This section describes precautions when moving the machine.
• Contact your service representative if you need to lift the machine (such as when relocating it to another
floor). Do not attempt to lift the machine without the assistance of your service representative. The
machine will be damaged if it topples or is dropped, resulting in malfunction and risk of injury to users.
The machine's various handling areas are for service engineer use only. Do not touch these areas.
• Before moving the machine, be sure to disconnect all external connections, especially the power cord
from the wall outlet. Damaged power cords are a fire and electric shock hazard.
• Unplug the power cord from the wall outlet before you move the machine. While moving the machine,
you should take care that the power cord will not be damaged under the machine.
• Be careful when moving the machine. Take the following precautions:
• Turn off the main power.
• Unplug the power cord from the wall outlet. When you pull out the plug from the socket, grip
the plug to avoid damaging the cord, thereby reducing the risk of fire or electric shock.
• Close all covers and trays, including the front cover and bypass tray.
• Do not carry the machine, by holding the scanner assembly. Keep the machine level and carry it
carefully, taking care not to jolt or tip it. Rough handling may cause a malfunction or damage the hard
disk or memory, resulting in loss of stored files.
8
133