Left Original Beeper; Placing Originals On The Exposure Glass - Ricoh 9050b Operating Instructions Manual

1. Placing Originals
• It is recommended that you use this function together with the Auto Paper Select or Auto Reduce /
Enlarge function.
1

Left Original Beeper

The beeper sounds and an error message is displayed when you leave your originals on the exposure
glass after copying.
You can change the beeper setting under Alert Sound: Original Left on Exposure Glass in User Tools. For
details, see "Copier/Document Server Features", General Settings Guide.

Placing Originals on the Exposure Glass

Place originals on the exposure glass.
• Do not lift the exposure glass cover or the ADF forcefully. Otherwise, the cover of the ADF might open
or be damaged.
1. Lift the exposure glass cover or the ADF.
Be sure to lift the exposure glass cover or the ADF by more than 30 degrees. Otherwise, the size of
the original might not be detected correctly.
2. Place the original face down on the exposure glass. The original should be aligned to the
rear left corner.
Start with the first page to be copied.
1. Positioning mark
2. Scales
3. Lower the exposure glass cover or the ADF.
24
BCU011S