Table of Contents
Advertisement
Chapter 2 The Web Configurator
The icons provide the following functions.
Table 2 Web Configurator Icons in the Title Bar
ICON
2.2.2 Navigation Panel
Use the menu items on the navigation panel to open screens to configure Device features. The
following tables describe each menu item.
Table 3 Navigation Panel Summary
LINK
Status
Network
WAN
LAN
Wireless LAN
NAT
Security
Firewall
24
DESCRIPTION
Wizards: Click this icon to go to the configuration wizards. See
55
for more information.
Logout: Click this icon to log out of the web configurator.
TAB
FUNCTION
This screen shows the Device's general device and network status
information. Use this screen to access the statistics and client list.
Internet Access
Use this screen to configure ISP parameters, WAN IP address
Setup
assignment, and other advanced properties.
More
Use this screen to configure additional WAN connections.
Connections
IP
Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
DHCP Server
Use this screen to configure LAN DHCP settings and DNS server.
Client List
Use this screen to view current DHCP client information and to always
assign specific IP addresses to individual MAC addresses (and host
names).
IP Alias
Use this screen to partition your LAN interface into subnets.
IPv6
Use this screen to configure the IPv6 settings on the Device's LAN
interface.
AP
Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
More AP
Use this screen to configure multiple BSSs on the Device.
WPS
Use this screen to configure and view your WPS (Wi-Fi Protected
Setup) settings.
WPS Station
Use this screen to set up a WPS wireless network.
WDS
Use this screen to set up Wireless Distribution System links to other
access points.
Scheduling
Use this screen to configure the dates/times to enable or disable the
wireless LAN.
General
Use this screen to enable NAT.
Port Forwarding
Use this screen to make your local servers visible to the outside world.
ALG
Use this screen to enable or disable SIP ALG.
General
Use this screen to set the default action that the firewall takes on
packets depending on packet direction.
Rules
Use this screen to view the configured firewall rules and add, edit or
remove a firewall rule.
Chapter 5 on page
AMG1302-T10A User's Guide
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
