Table of Contents
Advertisement
Chapter 2 The Web Configurator
2.2.3 Navigation Panel
Use the menu items on the navigation panel to open screens to configure Device features. The
following tables describe each menu item.
Table 3 Navigation Panel Summary
LINK
Connection Status
Network Setting
Broadband
Wireless
Home
Networking
Routing
28
TAB
FUNCTION
This screen shows the network status of the Device and computers/
devices connected to it.
Broadband
Use this screen to view and configure ISP parameters, WAN IP
address assignment, and other advanced properties. You can also add
new WAN connections.
3G Backup
Use this screen to configure 3G WAN connection.
Advanced
Use this screen to enable or disable PTM over ADSL, Annex M/Annex
J, and DSL PhyR functions.
8021x
Use this screen to view and configure the IEEE 802.1x settings on the
Device.
Ethernet WAN
Use this screen to configure a LAN port as an ethernet WAN port
General
Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
More AP
Use this screen to configure multiple BSSs on the Device.
MAC
Use this screen to block or allow wireless traffic from wireless devices
Authentication
of certain SSIDs and MAC addresses to the Device.
WPS
Use this screen to configure and view your WPS (Wi-Fi Protected
Setup) settings.
WMM
Use this screen to enable or disable Wi-Fi MultiMedia (WMM).
WDS
Use this screen to set up Wireless Distribution System (WDS) links to
other access points.
Others
Use this screen to configure advanced wireless settings.
Channel Status
Use this screen to scan wireless LAN channel noises and view the
results.
LAN Setup
Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
Static DHCP
Use this screen to assign specific IP addresses to individual MAC
addresses.
UPnP
Use this screen to turn UPnP and UPnP NAT-T on or off.
Additional
Use this screen to configure IP alias and public static IP.
Subnet
STB Vendor ID
Use this screen to have the Device automatically create static DHCP
entries for Set Top Box (STB) devices when they request IP
addresses.
LAN VLAN
Use this screen to control the VLAN ID and IEEE 802.1p priority tags
of traffic sent out through individual LAN ports.
Static Route
Use this screen to view and set up static routes on the Device.
Policy
Use this screen to configure policy routing on the Device.
Forwarding
RIP
Use this screen to configure Routing Information Protocol to
exchange routing information with other routers.
VMG1312-B10B / VMG1312-B30B Series User's Guide
Advertisement
Table of Contents
