Table of Contents
Advertisement
5.2
Cleaning the FLX-HUB
C
AUTION
noncorrosive and non-marking.
C
AUTION
Necessary tools
•
Soft brush.
•
Clean cloth.
•
FLX power cable.
•
FLX data cable with IP66 protection shells.
How to clean the FLX-HUB?
1. Connect the FLX power cable with the FLX-HUB. This is necessary to protect the electronic parts inside the unit.
2. Connect the FLX data cable, which has IP66 protection shells, with the data input port (RJ45) of the FLX-HUB. This is necessary
to protect the electronic parts inside the unit.
3. Clean the outside of the FLX-HUB with a soft brush and some water.
Caution:
Do not submerge the FLX-HUB into water or other liquids.
4. Wipe dry the FLX-HUB using a clean cloth.
5. Disconnect the FLX power cable and the FLX data cable from the FLX-HUB.
R59770419 FLX-60 12/05/2010
:
Do not use industrial grease removers. Use only materials or chemicals that are inert, nonabrasive,
:
Do not use a hard bristled brush.
5. Maintenance
63
Advertisement
Table of Contents
