Compact Clip Mounted Flx-60 Pixel - Barco FLX-60 Installation Manual

4. Installation procedures
4.6

Compact clip mounted FLX-60 pixel

Front access is required to install the FLX-60 pixel in a compact clip mounting hole.
The mounting hole for the FLX-60 pixel must require the specification of the cutting dimensions for compact
clip mount. See chapter "Mechanical requirements", page 10.
How to install the FLX-60 pixel in a compact clip mounting hole?
1. Is there back access?
If yes, you can choose to connect the FLX-60 pixel with the connector string now or wait until the FLX-60 pixel is mounted.
If no, pull the pixel socket of the connector string through the mounting hole and connect the FLX-60 pixel with the connector
string.
2. Compress the three clips of the FLX-60 pixel and approach the mounting hole from the front as illustrated. Make sure that the
clips are aligned with the cutouts in the mounting hole.
Note: The pixel orientation determines also the cable orientation. In and Out of the pixel socket should be in line to avoid
useless cable bends.
Image 4-11
Reverse this procedure to remove the FLX-60 pixel.
52 R59770419 FLX-60 12/05/2010