Table of Contents
Advertisement
4.10 Mounting the 19" rack bracket on the FLX-HUB
Necessary tools
PH1 Phillips screwdriver.
Necessary parts
•
Four M3x10 cross recessed pan head screws, steel zinc plated (DIN7985).
•
Four single coil spring washers, D3.1 - D6.2 (DIN127B).
How to mount the 19" rack bracket on the FLX-HUB?
1. Place the 19" rack bracket upon the two FLX-HUB units as illustrated. Fasten each FLX-HUB with four screws (reference 1)
using a PH1 Phillips screwdriver. Make sure that each screw is provided with a lock washer (reference 2).
Image 4-16
2. Now the FLX-HUB assembly can be installed in a standard 19" rack.
R59770419 FLX-60 12/05/2010
2
1
4. Installation procedures
57
Advertisement
Table of Contents
