Dx-700 Digitizer - Barco FLX-60 Installation Manual

3.7

DX-700 Digitizer

General
The DX-700 is a multi-window video processor designed for use as a versatile front-end to all Barco LED products. The digitizer
processes (image processing, conversion and conditioning) all source signals for digital distribution to every tile.
• Existing (legacy) LED products such as MiPIX, DLite, ILite and OLite are supported via the 32-bit DVI link on the system's DVI
Output Module.
• Next generation LED products such as the NX-4 tiles are supported via the NNI interface on the system's NNI Output Module.
Image processing and LED wall configuration and control functions are adjusted from Barco's Director toolset, or via controls on the
DX-700 Digitizer front panel itself. The Director toolset software is designed as a user interface to be used in conjunction with the
digitizer and display. It can be used on a PC that's connected to the digitizer through a serial RS232 connection.
Image 3-34
C
AUTION
guidelines.
R59770419 FLX-60 12/05/2010
:
Refer to the manual(s) of the used digitizer for more information about installation and usage
3. Components of an FLX display system
39