Lamp Runtime Warning: Do not exceed the indicated maximum total lifetime of the lamp for safe operation in normal power mode. Do not use it longer ! Always replace the lamp with the BARCO lamp kit. R5976839 IDR600/SIM5+ LAMP KIT 27/04/2005...
• Barco iDR600 • Barco Sim5+ The lamp replacement procedure is the same (independent of the projector type), the images in the replacement procedure are taken with a Barco iDR600 projector. Lamp description • Type : UHP • Power: 250 Watts •...
The lamp runtime should only be reset when placing a new lamp. ARNING Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized technician. How to reset the lamp runtime in the iDR600 ? 1.
3. Lamp replacement procedure ARNING Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized technician. How to reset the lamp runtime in the SIM5+? 1. Press MENU to activate the Tool bar 2.
Page 9
3. Lamp replacement procedure Necessary parts No parts. ARNING Risk of Electrical Shock: For replacement procedures power down the projector and unplug the power cord from the wall outlet. Once the projector is cooled down and the power is off, continue with the replacement procedure.
Page 11
3. Lamp replacement procedure Image 3-9 Image 3-10 Lamp removed 3.4 Mounting the lamp unit(s) What has to be done ? The lamp has to be mounted The lamp has to be connected. Perform the procedure for both lamps if both lamps have to be replaced. In this procedure lamp 1 is replaced, the procedure being the same for lamp 2.
3. Lamp replacement procedure Necessary parts No parts. How to mount the lamp unit ? 1. Place carefully the lamp against the frame 2. Push the lamp inwards and push in the lamp locking to lock the lamp 3. Connect the lamp 3.5 Mounting the cover.
Page 13
3. Lamp replacement procedure Image 3-14 lamp & engine filters removed Image 3-13 Lamp filter removal Image 3-16 Input filter removed Image 3-15 Input filter removal It is strongly recommended to replace or clean the dustfilter under the engine on a regular basis. Failing to do so, will strongly reduce the lifetime of the different components.