Table of Contents
Advertisement
3. Components of an FLX display system
See user guide of the Director toolset to learn more about Gamma curves.
BARCO FLX ► This controller
BARCO FLX
This controller
Address:
12
BARCO FLX
All controllers
Gamma
Address:
12
BARCO FLX ► This controllers ► Local patterns
BARCO FLX
This controller
Local patterns
Address:
12
BARCO FLX
This controller
local patterns
Address:
12
BARCO FLX ► This controller ► Contrast
BARCO FLX
This controller
Contrast:
55
Address:
12
BARCO FLX
This controller
Contrast:
55
Address:
12
BARCO FLX ► This controller ► Gamma
BARCO FLX
This controller
Gamma
Address:
12
24
► Local patterns
Contrast
Gamma
Info
Address
LCD contrast
String config
Address
LCD contrast
String config
Link errors
Restore settings
► Back
► Pattern off
Red
Green
Blue
White
Cycling
Blue
White
Cycling
Pixel on/off
Pixel off/on
► Back
► Full
Up 10
Up 1
Down 1
Down 10
Nill
Up 10
Up 1
Down 1
Down 10
Nill
► Back
► Flat
G1
G2
G3
G4
D1
Via this menu you have access to different controls of this
FLX-NNI Controller unit only.
▼
▲
The arrow ▼, in the lower right corner, which is pointing
downwards indicates that the list is longer than the LCD display.
Use the navigation buttons to scroll down to see the next items in
the list. An arrow ▲ in the upper right corner will appear.
The last item in the list is 'Back' which can be used to go to the
previous menu.
This menu allows you to activate one of the local test patterns for
this FLX-NNI Controller.
The arrow ▼, in the lower right corner, which is pointing
downwards indicates that the list is longer than the LCD display.
Use the navigation buttons to scroll down to see the next items in
▼
the list. An arrow ▲ in the upper right corner will appear.
▲
The last item in the list is 'Back' which can be used to go to the
previous menu.
Note that the Patterns menu does not automatically return to the
root menu after 30 seconds of inactivity.
This menu allows you to adjust the contrast of this FLX-NNI
Controller unit. The path at the right side shows the current
contrast value.
The contrast can be adjusted between 0 and 255 in steps of 1 or
10. Select 'Full' to set the contrast immediately to 255 and select
▼
'Nill' to set the contrast to 0.
▲
The arrow ▼, in the lower right corner, which is pointing
downwards indicates that the list is longer than the LCD display.
Use the navigation buttons to scroll down to see the next items in
the list. An arrow ▲ in the upper right corner will appear.
The last item in the list is 'Back' which can be used to go to the
previous menu.
This menu allows you to select and activate a gamma curve for
this FLX-NNI Controller. Use the navigation buttons to select
one of the predefined gamma curves and press the enter button
(center button) to activate the gamma curve.
▼
R59770419 FLX-60 12/05/2010
Advertisement
Table of Contents
