Cleaning The Flx-60 Pixel - Barco FLX-60 Installation Manual

5. Maintenance
5.1

Cleaning the FLX-60 pixel

C
AUTION
noncorrosive and non marking.
C
AUTION
Necessary tools
• Soft brush.
• Clean cloth.
• FLX-60 connector string.
How to clean the FLX-60 pixel?
1. Plug the FLX-60 pixel(s) on the connector string to seal off the power/data socket of the pixel. This is necessary to protect the
electronic parts inside the unit.
2. Clean the outside of the FLX-60 pixel with a soft brush and some water.
Caution: Do not submerge the FLX-60 pixel(s) into water or other liquids.
3. Wipe dry the FLX-60 pixel(s) using a clean cloth.
Always clean all FLX-60 pixels of the system to avoid brightness differences between cleaned and uncleaned
FLX-60 pixels.
62
:
Do not use industrial grease removers. Use only materials or chemicals that are inert, nonabrasive,
:
Do not use a hard bristled brush.
R59770419 FLX-60 12/05/2010