Table of Contents
Advertisement
4.2
Overview cabling FLX system with FLX-60 pixels
Cabling diagram
2
1
5
Image 4-1
1
NNI Data cable with latch (HDMI). Connection with the output port of the DX-700 Digitizer. Up to 10 meter or with NNI Fiberlink up to 150 meter.
2
NNI Data cable with latch (HDMI). Connection with the next FLX-NNI Controller. Up to 10 meter.
3
FLX Data cable with IP66 protection shells (RJ45). Connection with FLX-HUB input port. Up to 100 meter. Standard UTP network cable Cat 6 can be used if equipped
with IP66 protection shells.
4
FLX Power Cable. Up to 50 meter.
5
FLX-HUB output extension cable. Up to 20 meter till FLX-60 converter cable.
6
FLX-60 connector string. Up to 16 standard connector strings in cascade per output port of the FLX-HUB, or up to 256 FLX-60 pixels per string.
R59770419 FLX-60 12/05/2010
4
3
4. Installation procedures
6
43
Advertisement
Table of Contents
