Draytek Vigor2920 Series User Manual page 374

Username
Home Folder
Set to Factory Default
Click any index number to access into the configuration page.
Available settings are explained as follows:
Item
FTP/Samba User
Username
Password
Confirm Password
Home Folder
Vigor2920 Series User's Guide
Display the name that FTP/Samba users will use for accessing
into FTP/Samba server.
Display the home folder of this entry.
Click it to clear all profiles settings.
Description
Enable – Click this button to activate this profile (account) for
FTP service or Samba User service. Later, the user can use the
username specified in this page to login into FTP server.
Disable – Click this button to disable such profile.
Type the username for FTP/Samba users for accessing into
FTP server (USB storage disk). Be aware that users cannot
access into USB storage disk in anonymity. Later, you can
open FTP client software and type the username specified here
for accessing into USB storage disk.
Note: "Admin" could not be typed here as username, for
the word is specified for accessing into web pages of
Vigor router only. Also, it is reserved for FTP firmware
upgrade usage.
Note: FTP Passive mode is not supported by Vigor
Router.
Please disable that mode on the FTP client.
Type the password for FTP/Samba users for accessing FTP
server. Later, you can open FTP client software and type the
password specified here for accessing into USB storage disk.
Type the password again to make confirmation.
It determines the folder for the client to access into.
The user can Type a directory name in this field. Then, after
clicking OK, the router will create the specific/new folder in
364