Draytek Vigor2920 Series User Manual page 14

Interface
Factory Reset
GigaLAN (1-4)
WAN1/WAN2(Giga)
USB
PWR
ON/OFF
Vigor2920 Series User's Guide
Description
Restore the default settings. Usage: Turn on the router (ACT LED is blinking).
Press the hole and keep for more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button. Then the router will
restart with the factory default configuration.
Connecters for local networked devices.
Connecters for remote networked devices.
Connecter for 3G Modem or printer.
Connecter for a power adapter.
Power Switch.
4