Phone Settings - Draytek Vigor2920 Series User Manual

Packet Size
Voice Active Detector
4 . 1 3 . 3 P h o n e S e t
4 . 1 3 . 3 P h o n e S e
This page allows user to set phone settings for Phone 1 and Phone 2 respectively. However, it
changes slightly according to different model you have.
Available settings are explained as follows:
Item
Phone List
The amount of data contained in a single packet. The default
value is 20 ms, which means the data packet will contain 20 ms
voice information.
This function can detect if the voice on both sides is active or
not. If not, the router will do something to save the bandwidth
for other using. Click On to invoke this function; click off to
close the function.
t i n g s
t t i n g s
Description
Port – there are two phone ports provided here for you to
configure. Phone1/Phone2 allows you to set general settings
for PSTN phones.
Call Feature – A brief description for call feature will be
shown in this field for your reference.
Tone - Display the tone settings that configured in the
advanced settings page of Phone Index.
Gain - Display the volume gain settings for Mic/Speaker that
configured in the advanced settings page of Phone Index.
335
Vigor2920 Series User's Guide