Draytek Vigor2920 Series User Manual page 342

Item
Status
STUN Server
External IP
SIP PING interval
Available settings are explained as follows:
Item
Profile Name
Vigor2920 Series User's Guide
Description
Phone, ISDN1-S0 or ISDN-TE as the default ring port for the
SIP account. If you choose Phone or ISDN1-S0, the ISDN2-TE
selection will be dimmed, vice versa. There are ten internal
lines with numbers (30 – 39) offered for ISDN-S0. You can
specify any one of them as ring port for specified SIP account.
By the way, ISDN-S0 can be used by mapping with MSN
numbers.
Show the status for the corresponding SIP account. R means
such account is registered on SIP server successfully. – means
the account is failed to register on SIP server.
Type in the IP address or domain of the STUN server.
Type in the gateway IP address.
The default value is 150 (sec). It is useful for a Nortel server
NAT Traversal Support.
Description
Assign a name for this profile for identifying. You can type
similar name with the domain. For example, if the domain
name is draytel.org, then you might set draytel-1 in this field.
332