Bind Ip To Mac - Draytek Vigor2920 Series User Manual

4 . 2 . 5 B i n d I P t o M
4 . 2 . 5 B i n d I P t o M
This function is used to bind the IP and MAC address in LAN to have a strengthening control
in network. When this function is enabled, all the assigned IP and MAC address binding
together cannot be changed. If you modified the binding IP or MAC address, it might cause
you not access into the Internet.
Click LAN and click Bind IP to MAC to open the setup page.
Available settings are explained as follows:
Item
Enable
Disable
Strict Bind
ARP Table
Select All
Sort
A C
A C
Description
Click this radio button to invoke this function. However,
IP/MAC which is not listed in IP Bind List also can connect to
Internet.
Click this radio button to disable this function. All the settings
on this page will be invalid.
Click this radio button to block the connection of the IP/MAC
which is not listed in IP Bind List.
This table is the LAN ARP table of this router. The
information for IP and MAC will be displayed in this field.
Each pair of IP and MAC address listed in ARP table can be
selected and added to IP Bind List by clicking Add below
Click this link to select all the items in the ARP table.
Reorder the table based on the IP address.
167
.
Vigor2920 Series User's Guide