Draytek Vigor2920 Series User Manual page 168

D e t a i l s
D e t a i l s
Available settings are explained as follows:
Item
Network Configuration
DHCP Server
Configuration
Vigor2920 Series User's Guide
P a g e f o r I P R o u t e
P a g e f o r I P R o u t e
Description
Enable/Disable - Click Enable to enable such
configuration; click Disable to disable such configuration.
IP Address - Type in IP address for connecting to a local
private network (Default: 192.168.0.1).
Subnet Mask - Type in an address code that determines the
size of the network. (Default: 255.255.255.0/ 24)
RIP Protocol Control –
Disable - Deactivate the RIP protocol. It will lead to a
stoppage of the exchange of routing information between
routers. (Default)
Enable – Activate the RIP protocol.
DHCP stands for Dynamic Host Configuration Protocol.
The router by factory default acts a DHCP server for your
network so it automatically dispatch related IP settings to
any local user configured as a DHCP client. It is highly
recommended that you leave the router enabled as a DHCP
server if you do not have a DHCP server for your network.
If you want to use another DHCP server in the network
other than the Vigor Router's, you can let Relay Agent help
you to redirect the DHCP request to the specified location.
Start IP Address - Type a value of the IP address pool for
the DHCP server to start with when issuing IP addresses. If
d S u b n e t
d S u b n e t
158