Panic Button; Rec Led; Alarm Led; Power Led - ADT A-SDR400LTE-80 User Manual

Four-Channel Digital Video Recorder

PANIC Button

Pressing the button activates panic recording, so the DVR will record video regardless of
PANIC
the time-lapse or event recording schedule. Press the button again to release the panic recording.
NOTE: When the DVR is recording video, a red dot appears on the screen. When the DVR is
in the panic recording mode, a white appears in the red dot, and the REC LED on the front
panel flickers.

REC LED

The REC LED is lit when the DVR is recording. When the DVR is in the panic recording mode,
the REC LED flickers.

Alarm LED

The ALARM LED is lit when alarm output or internal buzzer is activated.

Power LED

The POWER LED is lit when the DVR is On.

Turning on the Power

Connecting the power cord to the DVR turns on the unit. The unit will take approximately 60
seconds to initialize.

Initial Unit Setup

Before using your DVR for the first time, you will want to establish the initial settings. This
includes items such as time and date, display language, camera, audio, remote control, record mode,
network and password. Your DVR can be set up using various screens and dialog boxes.
Press the button to enter the setup screens. The Admin Password screen appears.
MENU
Figure 16 — Admin Password screen.
Enter the password by pressing the appropriate combination of camera number buttons and then the
button. The factory default password is 4321. There are two Setup screens: Quick Setup and
Normal Setup. The factory default is the Normal Setup screen.
11