Print Control - Datamax H Class Operator's Manual

Print Control

Within the Print Control branch, the following menu selections are available:
•
Heat
•
Print Speed
•
Feed Speed
•
Reverse Speed *
•
Slew Speed *
•
Row Offset
•
Column Offset
•
Present Distance
•
Custom Adjustments *
Note: Items denoted with an asterisk (*) are only accessible through the Advanced Menu.
The menu selections are defined as follows:
DISPLAYED ITEM DESCRIPTION
ITEM
HEAT Controls the 'burn time' (0 - 30) of the printhead (also equivalent to the Heat
setting in many software labeling programs), where:
10 Is the Default Setting.
PRINT SPEED Controls the rate of label movement (2.0 - XX.X inches per second, model
dependent) during printing, where:
8.0 in/sec Is the Default Setting.
FEED SPEED Controls the rate of label movement (2.0 - 12.0 inches per second) between
printing areas, where:
8.0 in/sec Is the Default Setting.
REVERSE Controls the rate of label movement (2.0 - 5.0 inches per second) during backup
SPEED positioning, where:
4.0 in/sec Is the Default Setting.
SLEW SPEED Controls the rate of label movement (2.0 - 16.0 inches per second) between
printing areas when using the GPIO function, where:
8.0 in/sec Is the Default Setting.
47