Print Control - Datamax H-4212X Operator's Manual

4.2.2

Print Control

The Print Control menu contains print quality, throughput, formatting, and custom setup
functions:
Menu Item
HEAT
10 (0 – 30)
PRINT SPEED
XX.Xin/sec
FEED SPEED
XX.Xin/sec
REVERSE SPEED
X.Xin/sec
SLEW SPEED
XX.Xin/sec
ROW OFFSET
00.00 (0 – 99.99 in.)
COLUMN OFFSET
00.00 (0 – 99.99 in.)
38
Controls the burn-time of the printhead (selectable as
"Heat" in most labeling programs), where:
Is the number based on duration, corresponding to
print darkness.
Controls the rate of label movement during printing,
where:
Is the speed setting; see Appendix C for the model
dependant default and range.
Slower speeds may be required to print detailed
images, while faster printing may require an
increased HEAT setting for sufficient energy
transfer.
Controls the rate of label movement between printing
areas, where:
Is the speed setting; see Appendix C for the model
dependant default and range.
Controls the rate of label movement during backup
positioning, where:
Is the speed setting; see Appendix C for the default
and range.
Controls the rate of label movement between printing
areas when using the optional Applicator Interface
Card's GPIO function, where:
Is the speed setting; see Appendix C for the default
and range.
Shifts the vertical start of print position on the label,
where:
Is the offset distance; see Section 7 for label details.
Shifts the horizontal, left-justified start of print
position to the right without shifting the Label Width
termination point to the right, where:
Is the offset distance; see Section 7 for label details.
Details
H-Class