Table of Contents
Advertisement
The following example saves a manually-entered setup (an application that required a special
media calibration) as a configuration file:
Step
Action
1.
With the printer set for
the configuration to be
saved, press the any
Navigation Button.
2.
Press the DOWN Button
to scroll to ADVANCED
MENU then press the
RIGHT Button.
3.
Press the DOWN Button
to scroll to SYSTEM
SETTINGS then press
the RIGHT Button.
4.
Press the RIGHT Button.
5.
Use the DOWN Button
and scroll to SAVE
SETTING AS then press
the RIGHT Button.
6.
Use the UP, DOWN, and
RIGHT Buttons, as
needed.
7.
After the complete file
name has been input,
press the ENTER Key.
Displayed Message
SELECT FUNCTION You are entering the Menu System.
MENU WINDOW
SYSTEM SETTINGS You are in the 'System Settings'
CONFIGURATION
FILE
SAVE SETTING AS
SAVE SETTING AS
A
SUCCESSFUL
143
Comment
You are entering the Advanced
Menu. If you do not want to proceed,
press the EXIT Key to quit.
menu.
You are in the 'Configuration File'
submenu.
You are assigning a name to your
Configuration File.
Scroll through the alphanumeric
characters and advance the cursor
position to create a name (of up to
eight characters) for the file.
Save complete. (To restore a saved
configuration file via the User
Interface, use FACTORY SETTING
FILE to select the default
configuration file to be used by the
printer following a Level One Reset.)
Hide quick links:
Advertisement
Table of Contents
