6
TWAIN Lock Time
%
Specify the length of time until the machine operations are unlocked during scanning (except with
PUSH scanning). (Default setting: 120 sec.)
!
Detail
To use the machine as a scanner from application software using TWAIN, install the KONICA MINOLTA
TWAIN driver software designed for that purpose. For details, refer to the TWAIN driver manual on the
bizhub C353 Series CD-ROM.
When KONICA MINOLTA TWAIN is used, it is automatically unlocked at the specified time, even if it
was locked from the computer.
For a machine equipped with the optional image controller IC-409, this function is not available.
Default Scan/Fax Settings
%
Specify the default settings (settings selected when the [Reset] key is pressed) for the Fax/Scan mode.
6-130
Network Scan/Fax/Network Fax Operations
bizhub C203/C253/C353