Dg-Pcb Shield Plate - Nikon D300 Repair Manual

DG-PCB
・Mount the DG-PCB unit (#B11017) on the body.
・Tighten the screw (#1546).
・Connect the �PCs (#1027, #1038, #1039, #1040, and #1041) to each
connector of the DG-PCB.
・Connect the harnesses (#1073, #1074, and #1075) to each connector
of the DG-PCB.
#1041
#1075
#1073
#1040

DG-PCB shield plate

・Mount the DG-PCB shield plate unit (#B683RP) on the DG-PCB.
・Tighten four screws (#1546) and two screws (#1515).
・Make soldering bridge to joint with the DG-PCB.
Soldering bridge
I/� cover
・Mount the conduct plate (#695).
・Attach the I/� cover (#B28), and tighten two
screws (#1510).
#1039
#1074
DG-PCB unit
#1027
(#B11017)
#1038
#1546×4
#1515
#1515
DG-PCB shield plate unit shield plate unit
(#B683RP)
#695
- Ａ  ・ -
logo Q0310 forGraphic
070509 Gdesign ito
INC
VBA20001-R.3720.A
#1546
#B28
#1510×2