Nikon D300 Repair Manual page 39

Main PCB unit
・As below, mount [#775] on the body.
・Referring to the right picture, connect the
�PC (#B1005) to the connector of the main
PCB (#B1001).
・Mount [#B1001] on the body.
・Tighten three screws (#1616).
・Connect the �PCs (#1009 and #1030) and
shutter-�PC to each connector of [#B1001].
Eyepiece mold unit
・Mount the eyepiece mold unit
(#�8�1) by fitting with the two #�8�1) by fitting with the two
positioning bosses. .
・Tighten two screws (#1619).
#1616×3
#1039
Main PCB
#775
Oil barrier: OS-30MEL
#952
#58
#1644
#B1005
#1619×2
#B861
#B1001
#B57
- Ａ  ・
BLACK: A�-assist lamp unit
BLACK: A�-assist lamp unit
#1065
#1543×3
-
logo Q0310 forGraphic
070509 Gdesign ito
INC
VBA20001-R.3720.A
Shutter �PC
#1009
Main PCB (#B1001)
YELLOW:
Detection-SW
BLUE: Power contact
VIOLET: Power contact
#B1005
※ Solder the buzzer wire to the to the
�PC (#B1005).
#1030