Shield Plate \ Cf Pcb / Dg Pcb - Nikon D3 VBA18001 Repair Manual

Shield plate/CF PCB
・Take out the five screws (#1533).
・Remove the shield plate (#B531).
Caution: Be careful NOT to deform the shield plate, because it is assembled in the two shield locks.
・Take out the two screws (#1530), and remove the plate (#70).
・Remove the connection-FPC (#5049).
・Take out the two screws (#1532), and remove the CF PCB
(#5023).
Shield plate
#531
DG-PCB
・Take out the screw (#1533).
・Remove the four harnesses, three FPCs,
and battery box wire.
・Remove the DG-PCB unit (#B5022RP).
・Take out the two screws (#1536).
・Remove battery box unit (#818).
BATTERY BOX UNIT
#1536×2
#818
FPC #5049
Shield lock
#1533×5
- Ｄ  ･
logo Q0440 forGraphic
070518 Gdesign ito
#1530
#1530
DG-PCB unit (#B5022RP)
-
INC
VBA18001-R.3719.A
#70
#1532×2
CF PCB
#5023
#1533