D300 Inspection and Adjustment Software (J18433)
This inspection and adjustment software runs on Windows.
Install the software by following the below procedure.
<Operating environment>
Check the following operating environment which is required for installing this program on PC.
PC
IBM PC/AT compatible
OS
Windows XP Professional Edition, Windows XP Home Edition,
Windows Vista, Windows2000,
CPU
Pentium II 300MHz
RAM (memory)
256 MB or more
HD
6MB-or-more free disk space is required when installing
Monitor resolution
1024 × 768 pi�els or more
Interface
※ USB interface (V1.1, 2.0)
RS232C(com1 ~ com9)
As long as the above hardware requirements are met, any PC such as desktop or laptop, etc is available.
< Cautions in starting program >
When starting this program, close all the other applications.
If some other applications are running, this program may not be activated.
< �ile >
D300.e�e
Application e�ecution file
�kdPTP.dll
Library file: US� communication application e�tension file for Windows XP
�kdPTPDi.dll Library file: US� communication application e�tension file for Windows 2���
PTPControl
Driver file storing folder for PTP: for Windows 2000
D300IA.ini
�ile for storing setting conditions of adjustment software
- A ・
-
logo Q0310 forGraphic
070509 Gdesign ito
INC
VBA20001-R.3720.A