Eyelet, Af-Assist Illuminator Protector, Function-Button External Ring - Nikon D300 Repair Manual

Eyelet, A���assist illuminator protector, ��unction�button e�ternal ring < Adhesive >
※ Attach [#B43] and [#B44] to the [#B44] to the #B44] to the
top cover. Apply the adhesive to the 3
threaded portions
Adhesive: Loctite
#B43、#B44
※ ��i� �#�43� and �#�44� with the two nuts (#1�5�), #B43] and [#B44] with the two nuts (#1659), [#B44] with the two nuts (#1659), #B44] with the two nuts (#1659),
and apply the adhesive round the nuts (#1659).
Adhesive: Super X
#B43-side
Adhesive: Super X
※ Apply the adhesive to the 3 places of the
inside hole where the function-button
e�ternal ring (#788) is assembled.
※ Assemble �#788� by fitting its concave
portions with the conve� portions.
to the
#788
#B43
#1659
(#1659).
#B44-side
- Ａ  ・
#327
① Attach the A�-assist lamp protector (#327) to the top cover.
Then, position and attach it temporarily.
② Apply the adhesive as if covering the inside
#327
of the frame.
Adhesive: Loctite
Positioning
-
logo Q0310 forGraphic
070509 Gdesign ito
INC
VBA20001-R.3720.A
#B44
#1659
Adhesive: Super X