Dg Shield Plate; Dg-Pcb Unit - Nikon D200 Repair Manual

DG shield plate

DG-PCB unit

・ Remove the tape (#926).
・ Remove five FPCs from the connector.
・ Remove the two harnesses from the
connector.
・ Unsolder the four wires.
・ Remove the DG-PCB unit (#B1017).
#926
Harness
Soldering bridge
Harness
- Ｄ7 ･
#926
#B1017 DG-PCB unit
-
INC
VBA13001-R.3677.A