Command Dial/Release Sw - Nikon D300 Repair Manual

Command dial, Shoe base and other small parts
Shoe base
・��i� the outside LCD ��PC (#1��3), top cover, and the
shoe base firmly with four screws (#321).
・Solder [#1003] and [#B317].
Oil barrier: OS-30MEL
#703
Solder
#B735
#1605

Command dial/Release SW

・Mount the rear command dial (#B726) on the top cover, and tighten two screws (#1571).
・Mount the front command dial (#B725) by positioning it forwards, and tighten two screws (#1544).
・Assemble the release contact-�PC (#1033) into the front command dial (#B725), rear command dial (#B726),
release�SW (#�735), e�ternal LCD���PC (#1�33) in position, and solder them. SW (#�735), e�ternal LCD���PC (#1�33) in position, and solder them.
Solder
#701
#702
#708
#B726
#1571×2
#1033
�PC (#1033) into the front command dial (#B725), rear command dial (#B726), the front command dial (#B725), rear command dial (#B726),
- Ａ  ・
#318
#B317
#321×4
#324
#323
#1565
#B725
#1544×2
(#B725), rear command dial (#B726), , rear command dial (#B726),
-
logo Q0310 forGraphic
070509 Gdesign ito
INC
VBA20001-R.3720.A
#316
#948×2
#920
#1003
#972
Solder
Soldering bridge
(#B726),