Version No./Serial No.; Procedure For Upgrading Risc Firmware - Nikon D300 Repair Manual

8-6. Version No./Serial No.

・Provide the power for the camera via AC adapter.
・Set "PTP" mode by Setup menu.
・Connect the camera and PC via USB cable.
・Click "RISC VERSIO�" of the menu on screen.
・RISC version number/Serial number will be displayed.
＊ Cancelling "Read only" enables inputting the serial number.
※ Whenever the license sheet is replaced, be sure to input the new serial number.

8-7. Procedure for upgrading RISC firmware

・ After preparing the C� card, copy the latest version ( XXXX. BI�) into the root directory.
・ Insert the C� card, and select "�IRMWARE VERSIO�" from the SETUP menu.
・ ��ollow the instructions on screen for version updating. �t takes appro�. 3�4 minutes.
・ Check the version of firmware by "R�SC VERS�ON" of the image adjustment software.
�ote:
�n case incorrect files are included in the C�� card, the details for updating are not displayed even after
selecting "�IRMWARE VERSIO�" from the SETUP menu.
- Ａ  ・ -
logo Q0310 forGraphic
070509 Gdesign ito
INC
VBA20001-R.3720.A