Main PCB unit
・Remove the five solders of the
main PCB (#1001).
・Disconnect the FPCs (#1030,
#1009, #1005) and the shutter-
FPC from each connector.
・Take out the three screws (#1616),
and remove the main PCB
(#B1001) and the conduction lug
plate (#775).
#1616×3
#1045
#775
Eyepiece mold unit
・Take out the two screws
(#1619).
・Remove the eyepiece mold
unit (#B861).
#B861).
#1005
BLACK:AF-assit illuminator lamp unit
BLACK:AF-assit illuminator lamp unit
#1619×2
Main PCB
(#B1001)
#B57
#1543×3
- D ・
※ Remove the two solders of the buzzer
wires from the FPC (#B1005).
#B861
#1065
#952
-
logo Q0310 forGraphic
070509 Gdesign ito
INC
VBA20001-R.3720.A
Shutter-FPC
#1009
#1030
Main-PCB (#B1001)
YELLOW
BLUE
VIOLET
#B1005
BLACK×2
#58
#1644