TEC B-470 SERIES Maintenance Manual page 98

7. PROGRAM DOWN LOAD
7.2.3 Installation Procedure of Down Load Program
(1) Start up Windows 95 or Windows 98, and then insert the Program Loader Setup Disk (1/3) into
the PC floppy drive.
(2) Click on the Start button then highlight Run and click on Run.
(3) When the Run display appears, type in A:\SETUP.EXE and click on OK button.
(4) When requested, insert the Program Loader Setup Disk (2/3) and then the Program Loader
Setup Disk (3/3) to complete the program download.
NOTE: In some PCs, the Program Loader Setup Disks (1/3) and (2/3) may complete the program
download. In this case, installing the Program Loader Setup Disk (3/3) is not required.
7-6
EM18-33011
(Revision Date: Feb. 10, 2000)
7.2 WINDOWS VERSION