TEC B-470 SERIES Maintenance Manual page 97

7. PROGRAM DOWN LOAD
7.2.2 Setup and System requirements
Connect the B-470 printer to the PC via the RS-232C cable.
(1) System
(2) Interface
(3) Memory
(4) Hard Disk 5M byte minimum (10M byte or more recommended)
(5) Wiring of RS-232C Interface Cable
D-sub 9-pin (Female)
(Inch Screw)
RS-232C Cable
Windows 95 or Windows 98 (Windows 3.1 is not supported.)
Serial Interface only
16M byte minimum (32M byte or more recommended)
B-470 Printer
D-sub 9-pin (Male)
(Metric Screw)
7-5
EM18-33011
(Revision Date: Feb. 10, 2000)
7.2 WINDOWS VERSION