TEC B-470 SERIES Maintenance Manual page 46

6. DIAG. TEST OPERATION
6
Sensor 1 Check
SENSOR1 0 0 0 0 0 0 0 0 , 1 0 1 1 0 0 1 1
Fixed to 0.
Head up switch status
0: Head opened
1: Head closed
Fixed to 1.
Cutter home potion switch status
0: Home position
1: Other position
Rewind full sensor status
0: Normal
1: Excess
Slit sensor #1 (ribbon rewind) status
0: The detecting point is positioned
outside the slit.
1: The detecting point is positioned
inside the slit.
Slit sensor #2 (ribbon rewind) status
0: The detecting point is positioned
outside the slit.
1: The detecting point is positioned
inside the slit.
Fixed to 0.
Strip sensor status
0: Without label
1: With label
Ribbon end sensor status
0: Transmissive (with ribbon)
1: Non-transmissive (ribbon end)
6-9
EM18-33011
6.2 SELF TEST MODE