TEC B-470 SERIES Maintenance Manual page 59

6. DIAG. TEST OPERATION
X Axis Fine Adjustment Example
Top down printing
+ 0.0 mm
-50.0 mm
+50.0 mm
NOTES: 4. The X axis fine adjustment is performed to fine adjust the X axis of the drawing in the left
or right direction.
5. Adjust the X axis in the effective print range. (After the value reaches the coordinate "0", the
value remains unchanged even if the subsequent fine adjustment is performed in the
negative direction.)
6. X axis fine adjustment cannot be used in self test mode or test printing.
Feed direction
X
Y
ABC
-50.0 mm
ABC
+ 50.0 mm
ABC
Y
X
Bottom first printing
6-22
EM18-33011
6.3 PARAMETER SETTING MODE
Fig. 6-18
Fig. 6-19
Fig. 6-20