TEC B-470 SERIES Maintenance Manual page 81

6. DIAG. TEST OPERATION
9. When the transmissive ribbon is selected and DIP SW. 1-1 is set to ON, and the space area
is also 20 mm or more when the print speed is 3"/sec. or 6"/sec. or 30 mm or more when
10"/sec., the printer automatically enters ribbon saving print mode.
10. When "AUTO PRINT" is selected, 5 pcs. of the 3-dot slant line labels, bar code labels and
character labels are printed respectively after one label is fed.
Test Print Sample
• Slant line (1 dot)
Fig. 6-21
• Cahracters
Fig. 6-23
• FACTORY TEST PATTERN
Fig. 6-25
• Slant line (3 dot)
Fig. 6-22
• Bar code
Fig. 6-24
6-44
EM18-33011
(Revision Date: Feb. 07 '97)
6.4 TEST PRINT MODE