Pitney Bowes DM125 Operator's Manual page 97

6 • Adding Postage/Connecting to Data Centre
Settings for Connecting to the Data Centre
Distributor Values
7. Key in a new entry for that parameter (some entries may require
alpha-numeric characters). When finished, either select Restore
Default (if you made a mistake or changed your mind) or Set the
new value (if you are satisfied with your new entry).
8. If you have changed a parameter, a message confirming the new
setting displays. If you selected Restore Default, a message
informing you that the parameter has been set to the original
Factory setting displays. In either case, select Continue to return
to the Select to View/Edit menu.
9. Press Clear (back arrow key) to return to Options menu.
Account and User ID
This is the account number and the user ID that your sys tem uses to
dial into the internet service provider (ISP) that allows you to connect
to Pitney Bowes.
Global Password
This is the password your system uses to dial into your internet ser-
vice provider.
ANI/LCZ Server IP
This is the internet address of the Automatic Number Iden ti fi ca tion
(ANI)/Least Cost Zone (LCZ) server that iden ti fies your system and
routes your call to a zone that en sures the lowest cost for the con-
nection.
ANI/LCZ Server Port
The server port number identifies the port number on the ANI/LCZ
server to which your system connects.
Primary DNS Server
This is the internet address of the Pitney Bowes primary domain
name server (DNS). The domain name server con verts your system
name to its IP address.
Secondary DNS Server
This is the internet address of the Pitney Bowes sec ond ary domain
name server (DNS).
Distributor URL
The Universal Resource Locator (URL) of the web page to which
your system connects.
Backup PbP URL
The Universal Resource Locator (URL) of the backup web page to
which your system connects.
SV62667 Rev. A
(cont'd)
6-23