Pitney Bowes DM125 Operator's Manual page 113

Basic Options
Setting the Lock Codes and Passwords
Setting/Disabling the Lock Code
The lock code prevents unauthorized access to your mail ing system
upon awakening the machine after it has entered sleep mode or after
powering up the machine.
1. Press Options.
2. Press Page Down twice.
3. Select LockCode/Passwords.
4. Select Meter Lock Code.
NOTE:
i
key in the 4-digit code.
PASSWORDS
◄Meter Lock Code
◄Supervisor Password
5. If there is no existing lock code:
At the prompt, key in a lock code (4 digits) and select Continue.
Re-enter the lock code again to confirm and select Continue.
At the System Lock Code has been enabled message, select
Continue.
If you have an existing lock code,
You can either disable the lock code or change the lock code.
Meter Lock Options
◄Disable Lock Code
◄Change Lock Code
A. To disable the lock code:
Select Disable Lock Code. At the Meter Lock Code has
been disabled message, select Continue.
B. To change the lock code:
Select Change Lock Code. At the prompt, key in a new lock
code (4 digits) and select Continue. Re-enter the new lock
code again to confirm and select Continue. At the Meter
Lock Code has been enabled message, select Continue.
6. Press Clear (back arrow key) twice to return to Options menu.
SV62667 Rev. A
If there is an existing lock code, you are prompted to
7 • System Options
Page
Up
Page
Down
Page
Up
Page
Down
7-15