Communications With The Data Centre - Pitney Bowes DM125 Operator's Manual

6 • Adding Postage/Connecting to Data Centre
Using PC Meter Connect™ Desktop Application to
Establish Communications with the Data Centre
For information on installing and using this feature on
NOTE:
i
your PC, see Appendix A - PC Meter Connect
Once installed, all you need to do is verify that the PC Meter Con-
nect™ icon is in the system tray (this indicates it is running), and that
there is no red "X" on the icon (which indicates the mailing machine
is not detected by the application).
Icon in System Tray
If the PC Meter Connect
NOTE:
i
some reason (you'll know this when you don't see the PC Meter
Connect icon in the system tray), double clicking on the desktop
™
icon will restart the software. Alternately, you may click on the Start
button > All Programs > Pitney Bowes > PC Meter Connect. A PC
Meter Connect
Desktop
Shortcut Icon
If you connect or disconnect your machine from the PC, messages
display from the PC Meter Connect
• Meter Not Connected displays when you disconnect your ma-
chine from the PC. The red "X" stays on the icon thereafter.
• Meter detected displays when you connect your machine to the
PC (after it had been disconnected). The red "X" disappears.
6-6
icon will then appear in system tray.
™
™.
software was not running for
™
icon in the system tray:
™
SV62667 Rev. A