Pitney Bowes DM125 Operator's Manual page 91

6 • Adding Postage/Connecting to Data Centre
Settings for Connecting to the Data Centre
Phone Parameters
This menu option allows you to modify the phone con nec tion settings
on your machine (tone or pulse, dial prefix, etc.) when using an ana-
log phone line to connect to the Pitney Bowes Data Centre.
PHONE PARAMETERS
◄Tone/Pulse
◄Dialing Prefi x
◄Change PbP Number
PHONE PARAMETERS
◄Change Local Number
◄Modem Parameters
Selecting Tone/Pulse
Use this to tell the system whether you have a tone or pulse type phone.
1. Press Options.
2. Press Page Down twice.
3. Select Connect-Data Centre.
4. Select Phone Parameters.
5. Select Tone/Pulse.
6. Select Tone or Pulse, whichever is appropriate. The display
shows the new setting.
7. Press Clear (back arrow key) to return to Data Centre menu.
8. Press Clear (back arrow key) to return to Options menu.
Entering the Dial Prefix
Use this if you need to dial a prefix number (like 9) to get an out side
line.
1. Press Options.
2. Press Page Down twice.
3. Select Connect-Data Centre.
4. Select Phone Parameters.
5. Select Dialing Prefix.
6. Key in the prefix number you want (such as a 9).
7. Select OK. You return to the Data Centre menu.
8. Press Clear (back arrow key) to return to Options menu.
SV62667 Rev. A
(for analog line connection to Data Centre)
6-17