Pitney Bowes DM125 Operator's Manual page 118

7 • System Options
Basic Options
Setting Scale Options (cont'd)
Setting Class Change Options
You can set how the scale reacts regarding the postal code when the
class changes.
1. At the Home screen, press the selection key next to SCALE: line.
2. Press Page Down twice.
3. Select Change/Retain Code.
WHEN CLASS CHANGES
◄Change/Retain Code
4. The current condition is listed at the bottom of the screen. Select
either change code or retain code when class changes. If you don't
want to change the current setting, press Clear (back arrow key).
WHEN CLASS CHANGES
◄Change Code
◄Retain Code
(Currently Change)
5. Press Clear (back arrow key) to return to the Home screen.
Enabling Scale Stabilizing
In a typical office environment, you may encounter ventilation sys-
tems occasionally blowing on the scale, accidental bumps to the
scale and/or platform, and people dropping mail onto the platform.
This could result in unstable weight readings and frequent scale re-
zero operations. You can minimize these disturbances by enabling
the scale stabilizing feature. Enabling this feature could cause a
slight delay in scale response.
1. Press Options.
2. Press Page Down.
3. Select Turn items ON/OFF.
4. Press Page Down.
5. Select Scale Stabilizer.
6. The current setting (YES or NO) is listed on the screen. Follow
the prompt to change the setting.
7. Press Clear (back arrow key) to return to the Home screen.
7-20
Page
Up
Page
Down
Page
Up
Page
Down
SV62667 Rev. A